fertviet.blogg.se - Inventor export step file secure

#Inventor export step file secure how to
#Inventor export step file secure code
#Inventor export step file secure download
#Inventor export step file secure free

#Inventor export step file secure code

Show("Export file as '" & CurrentFile & _ "'?", "Cadline iLogic", _ MessageBoxButtons.YesNo, MessageBoxIcon.Question, _ MessageBoxDefaultButton.Button1 ) If SaveAs = vbNo Then Return Else ' User says continue FileExists = False End If End If Loop ' Put your export or 'save as' code in here *********************** ' Get the STEP translator Add-In. In this example I am exporting a Step file CurrentFile = Stepfilename & "_V" & Counter & ".stp" If Dir (CurrentFile ) "" Then ' The file does exist Counter += 1 FileExists = True Else SaveAs = MessageBox. stp file extension ' Is currently being used. PathAndFileName(False ) Counter = 0 FileExists = True 'check to see if the file to be exported already exists Do While FileExists ' Define name of exported file - note a. I hope you find this useful – ‘til next time! The same principle will work with any file extension that is exportable from Inventor. Note that you can easily modify this code depending on which type of file you are exporting. ‘Turbine_V6.stp’ – then export this file.ģ) Ask the user if they would like to open the export folder to check the results, and open the folder if they click ‘Yes’

If it does – check to see if ‘Turbine_V1.stp’ exists, and keep checking higher numbers until an unused filename is found – e.g.

If it doesn’t – export ‘Turbine_V0.stp’.

Turbine.ipt)Ģ) Check to see if a file called ‘Turbine_V0.stp’ exists in the same folder as Turbine.ipt. Here’s what the rule will do:ġ) Find the name of the current Inventor file (e.g. Let’s use an example of the tasty turbine model in the picture above (downloaded from Grabcad – thanks to Edward Otter). The file is called ‘Turbine.ipt’. This little bit of code may get you started though. And therefore there’s no such thing as a ‘one size fits all’ export format. Try the simple code below to check for existing files and add a ‘V1’, ‘V2’, ‘V3’ after the filename as required.Įvery company has slightly different requirements for exporting files from Inventor. And you want the exported file name to increment with a new version number suffix if an existing file export is found in the export folder. This is the easiest way to export your object as an STL to be printed later.You have some iLogic code that exports a file of some kind (STEP file, PDF, DXF etc.) or performs a ‘Save As’ operation.

#Inventor export step file secure download

This will download your TinkerCAD object as an STL file. In the “For 3D Print” section, click the.

#Inventor export step file secure how to

This will open a new window with details on how to export. To do this, click the “Export” button in the top right of the screen. When you are finished designing or editing in TinkerCAD and are ready to start printing, you can export your object as an STL from TinkerCAD. More detail on how to navigate the workplane can be found in the Navigating the Workplane tutorial. You can rotate the camera by holding the right mouse button and dragging the mouse. If your file is larger than this, consider choosing a different model to import.Īfter that, the object is loaded in and you should see it in the workplane. Note: there is a maximum file size of 25 MB. Once you do this, click the “Import” button in the bottom right of the window to import it. Since you downloaded an STL from thingiverse earlier, you can just open your downloads folder and drag-and-drop your file into the window. This will bring up a window to drag and drop a file, or to import from a URL. To import an object, click the “Import” button in the top right of the page. Right now, we are only going to focus on importing an object. This will bring up a window with a workplane, some shapes on the right, and some other options spread around. To get started, click the “Create new design” button near the top of your dashboard. If you just created an account, there will be no pictures. Note: when making a new account, make a new personal account and not an educational account.Īfter logging in, it will show a dashboard with previews of your TinkerCAD projects.

#Inventor export step file secure free

Creating an account is free and only requires a valid email address. If you do not have an account, click the “Join Now” button in the top right to create a personal account. If you have an Autodesk account already, you can click the “Sign In” button in the top right to get started. TinkerCAD is an autodesk product, and requires an account to use. To use TinkerCAD, navigate to the TinkerCAD website.